Strona wydrukowana z adresu:

Mobile antenna 30832

Mobile antenna 30832

Mobile antenna 30832

The 30832 rod antenna is designed to work with vehicle radiotelephones operating in frequency band164 ÷ 174 MHz. The antenna is equipped with a joint, which enables inclination of the antenna radiator to the ground. This type of antenna is adapted for installation on any motor vehicle.

Electrical specifications:

Typ (electrical length of antenna)


Code of horizontal antenna radiation pattern

000ND00 (according to CEPT T/R 25-08 Recommendation)

Versions of the antenna as a function of operating frequency


Operating band [MHz]

1, 2, 3

164 ÷ 174

Nominal input impedance

50 Ω

Standing wave ratio (SWR)


Antenna's power gain with the respect to the unipole λ/4

2 dB (4,15 dBi)

Polarization type


Max power

50 W

Type of antenna connector





2, 3

without connector

Type of antenna cable:

- ver. 1
- ver. 2
- ver. 3


H-155, 5m length
RG 58 All, 4m length
RG 58 All ,5m

Mechanical specifications:

Max height of antenna over the vehicle's body 

850 mm

Radiator weight

0,22 kg

Weight of antenna with coaxial cable

0,50 kg

Antenna mounting hole diameter

Φ 16,2 mm

Environmental conditions:

Operating temperature

-40°C ÷ +60°C

Storage temperature

-40°C ÷ +65°C

Relative humidity

< 98% w temp. +40°C

Operating conditions:

The 30832 antenna needs to be mounted to the metal body of a vehicle or to the metal bracket which is galvanically connected to the bodywork, which is a “ground plane” for the antenna. The place of mounting of the antenna needs to be close to the center of the largest horizontal plane of vehicle’s metal bodywork or close to the center of the whole structure of a vehicle. This way of installation ensures correct antenna impedance and a horizontal radiation pattern closest to circular.

The hole of a diameter Φ 16,2 mm between the antenna base (shield of a coaxial cable supplying an antenna) and the body work of a vehicle is required for installation of the antenna.