Strona wydrukowana z adresu: http://radmor.com.pl/Civil-products/Accessories/Antennas/Mobile/Mobile-Antenna-30820

Mobile Antenna 30820

Mobile antenna 30820

Mobile antenna 30820

The 30820 rod antenna is designed to work with mobile radiotelephones operating in frequency bands:

74÷88 MHz with simplex, semiduplex or duplex type of operation (for installation in the centre of TAXI lamp LZ type with 30820-1000/1 connectors set),

299,5÷345 MHz,

370÷400 MHz.

This type of antenna is adapted for installation on any motor vehicle.

Electrical specifications:

Type (electrical length of antenna)

λ/4

Code of horizontal antenna radiation pattern

000ND00 (according to CEPT T/R 25-08 Recommendation)

Versions of the antenna as a function of operating frequency

Version

Operating band [MHz]

1

299,5 ÷ 345

2

370 ÷ 400

3, 4

74 ÷ 88

Nominal input impedance

50 Ω

Standing wave ratio (SWR):

 versions 1, 2:
 for frequency  frez  in whole operating band
 versions 3, 4:
 for simplex operation
 for duplex operation
 -  trans. freq. 74,1÷74,8 MHz
 -  rec. freq. 83,9 ÷ 84,6 MHz

 

<1,2

<1,6
<1,3

<1,3
<3,0

Antenna's power gain with the respect to the unipole λ/4

0 dB (2,15 dBi)

Polarization type

vertical

Max power

50 W

Type of antenna connector

Version

Connector

1, 2

TNC-50

3

BNC-50

4

bez złącza

Type of antenna cable

RG58 All (or equivalent) 4m length

Tuning methode

radiator cutting

Mechanical specifications:

Max height of antenna over the vehicle's body:
 ver. 1
 ver. 2
 ver. 3, 4

 

300 mm
220 mm
1040 mm

Radiator weight

0,17 kg

Weight of antenna with coaxial cable

0,37 kg

Antenna mounting hole diameter

Φ 16,2 mm

Environmental conditions:

Operating temperature

-40°C ÷ +60°C

Relative humidity

< 98% in temp. +40°C

Operating conditions:

The 30820 needs to be mounted:
• versions 1 and 2: to the metal body of a vehicle or to the metal bracket which is galvanically connected to the bodywork,  which is a “ground plane”  for the antenna;
• versions 3 and 4: solely on the geometric centre of TAXI lamp LZ type with 30820-1000/1 connectors set , which are included with the antenna kit.
The place of mounting of the antenna needs to be close to the centre of the largest horizontal plane of vehicle’s metal bodywork or close to the centre of the whole structure of a vehicle. This way of installation ensures correct antenna impedance and a horizontal radiation pattern closest to circular.
The hole in a vehicle’s bodywork of a diameter of Φ 16,2 mm is required for installation of the antenna. During the installation it is particularly important to ensure a galvanic contact between the antenna base (shield of a coaxial cable supplying an antenna) and the bodywork of a vehicle.